|
Post by whocares on Apr 17, 2004 12:38:43 GMT -5
ok, im looking for some new trucks, but i dont know what size. i would have the same size as my Thunders right now, but i dont know what frikkin size they are.... ill probably get some GKs or some Tensors....
|
|
|
Post by boredskater on Apr 17, 2004 15:01:26 GMT -5
what are u asking which size people prefer or wat size ur current trucks are?
i like lows but i currently have mediums in my setup
|
|
|
Post by Thnikkaman on Apr 17, 2004 16:03:59 GMT -5
I think you might be confused. You need to find what size trucks you want, as in the width of the axle. Measure it. As for low mid and high, that's all you preference.
|
|
|
Post by whocares on Apr 17, 2004 17:40:49 GMT -5
pah, i needed to know what size (mid, low, high) they are, but i found out. yeah, what do you measure for the width? from nut to nut on the axle?
|
|
|
Post by whocares on Apr 17, 2004 20:46:34 GMT -5
never mind, i found out everything. so i got me some new tensors, white hanger dark blue baseplate
|
|
|
Post by forelander on Apr 17, 2004 21:34:52 GMT -5
i have destructo lows on my current set up and i prefer them skate wise, but i prefer to have my trucks kinda loose and skating them how i want ends up with the bolt over hanging the truck and the bolt being to loose. but apparently constant grinding has worn the bolt down, coz now its about where i want it and theyre how i like them.
|
|
|
Post by whocares on Apr 17, 2004 22:06:42 GMT -5
um... i kinda misscalculated on my truck size... I ordered a 7.75 and i ride 7.5.... um.... is there a way to fix this?
|
|
|
Post by Thnikkaman on Apr 17, 2004 23:03:49 GMT -5
Yeah, send your order back and exchange it. You're supposed to measure the trucks axle end to axle end, without the nuts.
|
|
|
Post by whocares on Apr 18, 2004 13:56:45 GMT -5
k, i just hope that maybe i just cant measure and somehow got the right trucks, so i dont lose 10 dollars on shipping....
|
|
|
Post by forelander on Apr 19, 2004 1:04:20 GMT -5
ah dude, 2.5mm difference isn't gonna make barely any difference. thats 1.25mm difference between the board and wheels either side. it's not worth worrying about, trust me.
|
|
|
Post by whocares on Apr 19, 2004 21:15:05 GMT -5
I was thinking that that much difference wouldnt do anything its only .25 of a inch.... at the very least i could grind down the axles a little.... damn their nice trucks....
|
|
|
Post by snuffy shiteside on Apr 19, 2004 22:26:44 GMT -5
don't worry about grinding down the trucks. just use the ones you ordered, if you hadn't checked again i doubt you would have noticed they were too big.
|
|
|
Post by viceversaman on May 4, 2004 5:55:59 GMT -5
i hope no one finds out im ascociated with someone that rides tensors im a low man myself, low ventures or mid destructos. or the furys that have the nut lock thing that have the blue baseplate and black hanger. what evs as they say.
|
|
|
Post by tubbyturd on May 5, 2004 23:59:07 GMT -5
fury trucks are pretty nice....I'm still sporting gk titaniums....I love the kingpin placement
|
|
|
Post by viceversaman on May 28, 2004 3:09:45 GMT -5
ive never been a big fan of grind king. dont know why. im a fuddy duddy who goes for half technical trucks. as in whats put into them. grind kinda have all this shit that totally turns me off.
i saw this ad for the new lucky's called "fast as F-CKS". what ever, they should drop that whole hardcore image and make their wheels betetr.
|
|